Chapter 4 – Bulkheads

Home -> Chapter Summary <- Chapter 3 Chapter 5 ->

I used carbon paper under the M-drawings to trace patterns on the Clark foam, then cut with a razor.

For the hard Clark foam, I tapped a razor blade to get a good straight edge.

Gear bulkheads with hardpoints.

Read people’s problems with firewall screws rotating. I ground down the screw heads, and set them in flox along with music wire. Will report back if it holds.
Here’s the screws and music wire in place – flox to be added.

Back of instrument panel, with electrical channels and reinforcement layups.

Home -> Chapter Summary <- Chapter 3 Chapter 5 ->