1
Hangar Flying / pictures
« on: July 19, 2012, 03:38:12 AM »
Is there something wrong with the new pictures section? I have the latest password but cant get them to open.
David
David
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Hangar Flying / Rutan Designs
« on: July 31, 2008, 03:27:31 AM »
Check this out.
http://www.homebuiltairplanes.com/forums/showthread.php?t=4103
#1 post asks why there are not many Long EZ's present at flyin's.
Read the #5 post! Maybe he needs to show up at the Rough River flyin!
http://www.homebuiltairplanes.com/forums/showthread.php?t=4103
#1 post asks why there are not many Long EZ's present at flyin's.
Read the #5 post! Maybe he needs to show up at the Rough River flyin!
3
For Sale/Wanted / Rutan Video
« on: February 12, 2008, 02:52:23 PM »
Anyone have the video "Go-A-LongEz"? I loaned mine out and never got it back. Can't remember who I loaned it to!! Would be glad to pay for a copy (on DVD if possible) if anyone would be willing to burn one for me.
David
David
4
Hangar Flying / Micro fill
« on: November 05, 2007, 10:45:16 AM »
Need some opinions. I have read that epoxy temps should be maintained 65 degrees or above for several hours after a layup. I have done all my structural layups with temps in the 80 degree range. My question is about the micro fill (non structural) stage only. Will temps in the 45-50 degree range effect the quality of the micro fill? I have placed excess micro in the freezer to slow the cure and used it a day or two later. If I did not use it for several days it cured even though it was still in the freezer. Just wondering if I have to fire up the heaters to do a micro fill only.
David
David
5
Hangar Flying / Extruded hinge
« on: February 08, 2007, 03:19:14 PM »
I need 2 feet of ms20001-9 piano hinge. I can only find it in 6 Ft. sections and the best price so far has been $140.00!!! Anyone know where I can find someone willing to cut to the length I need?
6
Hangar Flying / GPS for PDA
« on: December 17, 2005, 09:25:28 AM »
Anyone have experience with a GPS program for a Palm OS PDA?
7
Hangar Flying / Primer and Paint
« on: June 06, 2005, 06:10:46 PM »
OK guys I need some expert advice! First let me say I am NOT a painter. I have a friend willing to apply the paint. I am trying to do everything else learning as I go. I have the bottom of the fuselage covered with smooth prime from Polyfiber. So far everything looks good. I do not plan to use Polyfiber top coats! I have heard good and bad reports about smooth prime. Any advice on finishing the plane after the micro fill stage would be appreciated.
David [/b]
David [/b]
Pages: [1]