Nose Skidplate

Author Topic: Nose Skidplate  (Read 4475 times)

0 Members and 1 Guest are viewing this topic.

Offline easyrider

  • Newbie
  • *
  • Posts: 222
    • View Profile
Nose Skidplate
« on: July 29, 2006, 05:19:58 PM »
I know it will never happen to any of you but if you should land with the nosewheel retracted I have had made an aluminum skid plate that will take most of the initial contact with the tarmac.It is made of 0.25" 6061T6
Aluminum stock.
If you are interested in obtaing one e-mail me @ canardflyer@hughes.net
for a picture
Easyrider
LongEz93EZ

Offline Wayne Hicks

  • Newbie
  • *
  • Posts: 7
    • View Profile
Nose Skidplate
« Reply #1 on: August 01, 2006, 12:27:48 PM »
Wayne Hicks
Cozy IV Plans #678

Offline Gilbert DRIEUX

  • Newbie
  • *
  • Posts: 85
    • View Profile
Nose Skidplate
« Reply #2 on: August 01, 2006, 01:21:58 PM »
Quote from: "Wayne Hicks"
You mean like this?
http://www.maddyhome.com/canardpages/pages/waynehicks/chapter_13_8.htm


I agree. It's true.
From maddyhome :
<<If you study pictures of a gear-up landing, you'll come to four conclusions right away; (1) asphalt is the best sandpaper ever made! (2) the plans-built nose puck doesn't do diddly; (3) there's nothing substantial enough to protect the NG5 backing plate, screws, and nose gear strut from being irreparably damaged;

and (4) it's true, "there are those that have and those that will.">>

 :shock: I was from those that will, I'm recently from those that have.  :roll:

Regards. :lol:
Gilbert
VE N° 1736
F-PMPZ
Lyc O-235 C2C
@ LFPK / France

Offline Tom

  • Newbie
  • *
  • Posts: 125
    • View Profile
Nose Skidplate
« Reply #3 on: August 02, 2006, 09:39:58 AM »
Hey why not just remember to put the nose gear down :wink:

And ensure your gear unsafe warning system is functional!!

Offline Waiter

  • Newbie
  • *
  • Posts: 306
    • View Profile
    • http://www.iflyez.com
Nose Skidplate
« Reply #4 on: August 02, 2006, 10:00:08 AM »
Quote
And ensure your gear unsafe warning system is functional!!


This would probably solve about 99.9 percent of the gear ups. Most gear warning systems I see in homebuilts are "toys".

The gear warning horn must be the loudest, most obnoxious sounding device you can get your hands on.

I put it like this;  You could be on fire, the GIB screaming and pucking down your collar, The canopy is busted and and theres bird guts everywhere. But when that gear warning horn goes off, its so load and so obnoxious, that it immediately overrides all this other input, and you will do anything (including putting the gear down) in order to "shut that damn thing up".  When that horn goes off, there is no mistake that the gear is not down.

The cute little LED lights don't cut it, and those Radio Shack buzzers are drowned out by other noise.

Use a klaxon horn (with a circuit breaker).  Even people on the ground under your final approach will know that your gear is still in the well.

The circuit is simple: Two switches in series, one switch closes anytime the throttle is pulled to near idle, the other switch opens only when the gear is down and over center.

Waiter
LongEZ-RG   >>    N961EZ
O-320 160hp  >>    MT Constant Speed Prop
F-16 Performance, On a Piper Cub Budget
www.iflyez.com

Offline Delta Mike

  • Newbie
  • *
  • Posts: 31
    • View Profile
Nose Skidplate
« Reply #5 on: August 02, 2006, 07:36:08 PM »
Obvioulsy Waiter has more at stake when his gear are up.
Daudi Barnes
Long-EZ 17LE
Durango CO

Offline easyrider

  • Newbie
  • *
  • Posts: 222
    • View Profile
Skidplate
« Reply #6 on: August 03, 2006, 07:49:07 PM »
Wayne
Thanks for the posting on the skidplate. I hadn't seen yours before and I suppose we logically came up with the same solution.
Easyrider