Canard with dihedral a la Stagger-EZ

Author Topic: Canard with dihedral a la Stagger-EZ  (Read 3917 times)

0 Members and 1 Guest are viewing this topic.

Offline Localizer

  • Newbie
  • *
  • Posts: 7
    • View Profile
Canard with dihedral a la Stagger-EZ
« on: May 06, 2008, 09:58:51 PM »
Hello all,
I've been wondering about Steve Wright's interesting canard configuration.  I understand that roll rate is increased due to less turbulent air over the ailerons, but I was wondering if this also increases roll stability due to dihedral effect.  A Long-EZ builder/pilot friend of mine was commenting on his aircraft's lack of dihedral on any surface, and I immediately thought of the Stagger-EZ.  Anyone have any first-hand info/insight on this setup?  Has anyone tried this on a Long-EZ?  If you're browsing this forum Steve, your comments would be very welcome.  Cheers!
Balance in all things.

Offline admin

  • Administrator
  • Newbie
  • *****
  • Posts: 89
    • View Profile
Canard with dihedral a la Stagger-EZ
« Reply #1 on: May 07, 2008, 11:34:58 AM »
There was a long-ez that was modified like that. As I recall there
were minimal changes to the flying qualities with a very
slight increase in roll rate. There is a write up in an old
CSA newsletter.

Offline flyingwaldo

  • Moderator
  • Newbie
  • *****
  • Posts: 274
    • View Profile
Canard with dihedral a la Stagger-EZ
« Reply #2 on: May 07, 2008, 02:30:32 PM »
Ken Miller Tried It
For some reason he never wanted to talk about it.