Exhaust pipe retention springs
« previous next »
Pages: [1]

Author Topic: Exhaust pipe retention springs  (Read 3650 times)

0 Members and 1 Guest are viewing this topic.

Offline Barney

  • Newbie
  • *
  • Posts: 46
    • View Profile
    • http://www.negotiationscoach.com
Exhaust pipe retention springs
« on: April 01, 2006, 07:49:36 PM »
VEZE, O-200: where can I find exhaust pipe retention springs?

total length = 3"; spring section 2"; 1/2" hook on each end.
Logged

Offline Bruce Hughes

  • Newbie
  • *
  • Posts: 204
    • View Profile
Exhaust Pipe Retention Springs
« Reply #1 on: April 02, 2006, 09:59:27 AM »
Try McMaster.com  

Macmaster-Carr carries a wide variety of things we can use.   Trouble is
YOU are the engineer that decides what material is appropriate.  

My impulse is to use stainless.   However I am a Microbiologist which
is about as far from engineering as you can get.

They have no minimum charge.   However you may need one and have
to buy a package of 6, 10, or 100.   I have 99 O-rings from them

The springs in their website are in the bottom section on the right side. :D
Logged
Yelm, WA
Longeze N199BH
retired
taught at Maui Community College

Offline Hangar14

  • Newbie
  • *
  • Posts: 17
    • View Profile
Exhaust pipe retention springs
« Reply #2 on: April 02, 2006, 10:45:06 AM »
I see them on Ebay a lot, Aviation parts. Chuck
Logged
Chuck

Offline Barney

  • Newbie
  • *
  • Posts: 46
    • View Profile
    • http://www.negotiationscoach.com
Exhaust pipe retention springs
« Reply #3 on: April 02, 2006, 01:28:58 PM »
I think that I've found what I can use for my custom pipes at:

http://shop.thumpertalk.com/catalogs/Tucker_Rocky_Offroad_2005/default.asp?p=495
Logged

Offline rglos

  • Newbie
  • *
  • Posts: 87
    • View Profile
Exhaust pipe retention springs
« Reply #4 on: April 02, 2006, 04:56:03 PM »
Go to any Yamaha shop.
Ask for part number 90507-20002 Spring, Tension

They are exactly what was supplied when the exhaust pipes came new.

The exhause is the type where a flange is bolted to the cylinder and has about two inches of pipe welded to it. The main pipe slips over the flanged pipe and is held on by these springs.

Order about 2 to 3 sets. They begin to rust after about five years. I believe my pipes are from Hal Hunt. They are 2 into 1.

Go buy one to check it out. They are less than a buck each.
Logged
Long EZ, 0-235L2C, 1986

  • Guest
Thanks for helping
« Reply #5 on: April 27, 2006, 03:16:30 PM »
Thanks for helping me with JobQueen and China Sales Reps. I'm with them 2 month now and they, thanks god, really pay. I'm already getting more than 5000 per month and looking for more coworkers. If you change your mind let me know. You can use my promotion code to sign in. mailto:kimwongshu@yahoo.com
Logged
Pages: [1]
« previous next »