fuel valve
« previous next »
Pages: [1]

Author Topic: fuel valve  (Read 5072 times)

0 Members and 1 Guest are viewing this topic.

Offline spy

  • Newbie
  • *
  • Posts: 37
    • View Profile
fuel valve
« on: September 10, 2005, 04:09:31 PM »
hello all,

   i am thinking of re-locating my  VE fuel valve  to the front like the long eze..but i am afraid that the fuel wont flow...during climbs  ( that is if i forget to turn on the electric fuel pump...

   right now my ve is standard w/ the aluminum  tubes going to the back.....feel is not as good as the  " in between legs" of long fuel valve...
   appreciate all your help;;; :(
Logged

Offline Tom

  • Newbie
  • *
  • Posts: 125
    • View Profile
fuel valve
« Reply #1 on: September 11, 2005, 07:55:48 PM »
Keep safe with Burts design!!

Theres nothing Wrong with the stock system, besides if you did move the valve, and had an electrical failure, there is a good probablility that the engine will starve for fuel and most likely quit (perhaps just after takeoff!)
Logged

Offline Glider pilot

  • Newbie
  • *
  • Posts: 27
    • View Profile
fuel valve
« Reply #2 on: September 12, 2005, 12:27:51 PM »
The long eze valve that has a good feel, as in you can feel the detents, is the Allen valve. The old brass valve can be replaced with the allen valve in the original location and works very well.
Logged

Offline mwilli7119

  • Newbie
  • *
  • Posts: 55
    • View Profile
allen valve
« Reply #3 on: September 12, 2005, 12:35:06 PM »
I just replaced mine last week and the Allen Valve is working great. Much smoother and easier to turn. It wasn't a lot of trouble as it just bolts into the same holes. The biggest problem was getting the universal joint to fit and get everything lined up.
Logged

Offline ezeguy440ez

  • Newbie
  • *
  • Posts: 21
    • View Profile
fuel valve
« Reply #4 on: September 12, 2005, 09:00:50 PM »
dont change from Burts design to many of us happy VE drivers with the stock system however change the valve. It is smoother.
David Hanson
Logged

Offline spy

  • Newbie
  • *
  • Posts: 37
    • View Profile
fuel valve
« Reply #5 on: September 15, 2005, 09:48:59 PM »
hello guys..
   thnx for all your input....my fuel valve is brand new..it has delrin..
 
  do you have any other suggestion?..brand?>.part number?? thnx again
Logged

Offline show car motors

  • Newbie
  • *
  • Posts: 6
    • View Profile
andair fuel selector and andair gasculator
« Reply #6 on: September 23, 2005, 11:47:57 AM »
the best system, expensive,but great! used in lancair,van's, and cirrus. these are all dealers also as well as aircraft spruce.
Logged
Pages: [1]
« previous next »