Print Page - NG-31 Bulkhead DXG
Hangar Flying
Hangar Flying => Hangar Flying => Topic started by: filiperosa on August 18, 2019, 04:50:13 AM
-
Hello,
I was looking on this website:
http://v2.ez.org/nose1204.htm
About carving a new nose. It is written:
The NG-31 bulkhead is enlarged, Here is a cad drawing that can be used to properly size it.
However the cad link:
http://v2.ez.org/nosecad.dxf
is not working. Anyone has this file that could share?
Thanks,
Filipe