Show Posts - rutanfan

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - rutanfan

Pages: 1 [2]
16
Hangar Flying / Long EZ templates
« on: April 29, 2005, 10:40:22 PM »
Quote: "But the A-size drawings contain more than just the airfoils. I have a list of what's on them, but not with me at the moment."

Exactly. You need the A-size drawings for assembly information. Otherwise you could simply purchase the TERF CD-ROM and build your Long-ez from that.

Quote: "How to solve that problem? The Cozy dimensions will be different, so you won't be able to directly transfer them...are you suggesting that you reverse engineer from the Cozy back to a LongEZ (what Nat did, only backwards)?"

No I'm suggesting you purchase the TERF CD-Rom (which you'll need anyway because you need the CP's) and purchase a set of Cozy plans, and purchase the cores & molded spars from Aerocad, which will save you 100's of hours and ultimately yield a lighter and stronger part. The TERF CD-ROM contains the Long-ez section I plans.

Quote: "I'd rather spend the $$$ for an unused set of LongEZ plans."

I believe the last unused set to sell on Ebay was about $1,200.  Plus $300 for the TERF CD-Rom. You can start building with no support for $1,500.

Buy the Cozy plans with CD news letter with full support for $520 & the TERF CD-Rom for $300 (Now you have two plane plans for less than the Long-ez plans.) You saved $700. The real doozy, however, is the cost of molded spars and pre-cut foam ($3240.)

17
Hangar Flying / Building a Long-ez
« on: April 29, 2005, 01:36:30 PM »
I've often thought about this myself (after paying $750 for an unused Long-ez plans set & another $300 for the TERF CD-Rom.)

If I was going to build a Long-ez again, I'd purchase a licensed set of Cozy or Aerocad plans and the TERF-CD rom which contains all of the Long-ez plans except the A-size drawings. Then purchase the Long-ez molded spar and and foam from Aerocad.

18
Hangar Flying / Copying Templates
« on: April 04, 2005, 02:54:50 PM »
I thought the same thing, until I copied my templates. I copied the canard templates at Kinkos and found the Roncz airfoil to be approximately 1/8” longer than the original.

I then took my plans to Service Blue (a professional blueprinting company) and they were exactly the same size.

19
Hangar Flying / Roncz Canard
« on: March 24, 2005, 10:59:44 AM »
Hank. I'm currently building/installing a Roncz on my Long-ez. If you choose to build one yourself, you're looking at least $600 in materials. I just purchased all of the materials. The Brock parts alone came to $387.20 (not including shipping.) My Aircraft Spruce bill was about $250 (which included a hand riveter as I needed one, but the price does not include any uni, bid or epoxy as I already had enough.)

Contact me offline if you need help with the incidences. I have some material that may be useful. Also, let me know if you have AutoCAD.

rutanfan@yahoo.com

Ray

20
Hangar Flying / Nose Gear Door
« on: December 30, 2004, 04:01:21 PM »
I believe you are refering to the Berkut style nose gear door which utilizes a stainless steel strap to keep the door open, and a spring to pull it shut upon retraction. James Redmon has a great description on his web page. http://www.berkut13.com/ngrdor4.jpg

I purchased the Berkut plans from John Griffiths (310) 390-7841. I was actually looking at the plans yesterday, and it calls out all components of the gear door. If I were you, I'd contact John and request a set of the nose gear plans. I'm sure it would save you a lot of time.

I've got the plans folded up and put away, so if you'd prefer I'll look up the specific items. Let me know if you need them.

Ray

21
Hangar Flying / Gary Hall Hinge Mod
« on: December 24, 2004, 10:39:04 AM »
He e-mailed me just the other day, so I know this is still current. gary.chris@comcast.net

Pages: 1 [2]