Hangar Flying

Hangar Flying => Hangar Flying => Topic started by: tomkat01 on June 13, 2006, 06:21:08 PM

Title: Has anybody tried Aerothane by Polyfiber
Post by: tomkat01 on June 13, 2006, 06:21:08 PM

Has Anybody tried aerothane By ployfiber? I like the idea of a single stage paint . Fewer coats, less weight  and flexible.
please let me know your experiences

 Tom

Title: Has anybody tried Aerothane by Polyfiber
Post by: Spodman on June 16, 2006, 08:22:47 PM

I haven't used it, or anything else for that matter, but have read this report on another forum:

http://www.maddyhome.com/cozysrch search for aerothane

Quote

Now a word about the paint. The Aerothane primer they sent was awful. I used a full gallon, but didn't get acceptable  coverage. Pin holes and scratches appeared out of nowhere as it went on. Even after 4 coats, you could see the color  of the base and filler through the paint. Yuk. Do NOT buy Aerothane primer... In summary, I highly recommend Polyfiber as a company that stands by its products and values it's customers. I do not recommend Aerothane primer, but I do strongly recommend Ranthane gloss paint.

Title: Has anybody tried Aerothane by Polyfiber
Post by: tonyslongez on June 19, 2006, 05:34:27 PM

You can't go wrong with Colorthane from Shirwin Williams industrial Dept.
That stuff is a dream to shoot covers like a champ drys hard as a rock. Wet sand it out and buff it. You won't be dissapointed