Print Page - OK, got the plane in the garage..whats this bit for??
Hangar Flying
Hangar Flying => Hangar Flying => Topic started by: Britguy59 on August 31, 2006, 05:17:37 PM
Title: OK, got the plane in the garage..whats this bit for??
Post by: Britguy59 on August 31, 2006, 05:17:37 PM
Now installed at home, I'm going through the plans and the plane. Couple of odd things. The rudder pedals have brake cylinders attached to them in the nose, but the plans call for them on the firewall. Is this a mod of some sort? Also, the canard seems longer than plans. How can I tell if its an upgraded style? I got an I0-320 and not sure if I need a mod for the prop. And what kind of prop to put on? Cruise type works for me, but not sure what to shop for. If you have a similar aircraft, let me know your set up. Thanks to all, help me get this thing in the air! :shock:
Title: OK, got the plane in the garage..whats this bit for??
Post by: on September 01, 2006, 10:46:52 AM
Nose mounted brake cylinders is a popular mod. I am sure that there are some drawings out there somewhere.
What is the actual span of your canard?
I have an IO-320 on my Long. It has 10:1 pistons and LSE electronic ignition. I have a Catto 3-blade prop.
One thing that I always do with a partially completed project or a finished airplane is to check it for conformity. I go through the airplane, nose to tail, comparing it to the plans, measuring and weighing as I go along.
Rick Pellicciotti
Title: OK, got the plane in the garage..whats this bit for??
Post by: on September 01, 2006, 11:53:50 AM
I forgot to post this link to James Redmond's excellent web site. It describes the nose mounted brakes.
http://www.berkut13.com/berkut26.htm
Regards,
Rick Pellicciotti
Title: OK, got the plane in the garage..whats this bit for??
Post by: Bruce Hughes on September 01, 2006, 04:32:44 PM
Hi
I think most of us have the brake cylinders in the nose (1) there is just not enough space in the back for everything (2) helps with the Cg a very little bit. Yes, Burt is a genius but that does NOT mean that we have to follow absolutely every thing in the plans in minutest detail.
IF YOU DO NOT FOLLOW THE PLANS BE SURE TO ASK AN EXPERT. or several experts.....
How do you find an expert? (1) Join the CSA and see who lives close to you (from the directory). Some will be experts, some may not have a clue. Be careful!
(2) contact me off line and I will tell you who I check with. At least I can recognize an expert
Bruce Hughes
Title: forward mounted master cylinders
Post by: walter on September 05, 2006, 02:42:11 PM
Hey Britguy check out deb's page. She has a booklet that contains info on a form of the forward mounted master cylinder mod. Hope that helps.