Show Posts - Snappy

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Snappy

Pages: [1]
1
Hangar Flying / Throttle Body
« on: October 12, 2006, 09:07:07 PM »
Ok, I'm on my 2nd Sp-4 and it's well on it's way to wearing out.  Anyone tried an ellison with any success?  I once flew a VW with a Posa carburator and yes, it did work but was NOT an aircraft carburator.  What about the Ellisons?
Snappy

2
Hangar Flying / Bugs
« on: April 25, 2006, 09:59:52 PM »
Nothing like a good day of killing bugs to relax a man!  Now to get them off the leading edges and canopy.  Anyone have the 'best' way to get the critters off?

I've used Pledge spray wax, comet non-abrasive bathroom cleaner, spit and 409.  Everything but the Pledge has to be waxed over before your next bug-squashing flight or the damn things weld to the leading edges!

3
Hangar Flying / Breather
« on: May 25, 2005, 07:11:28 AM »
I've tried routing the breather tube directly overboard and two different oil/air seperators and am still not satisifed.  Does anyone know of a way to let the engine breathe properly and NOT have oil/water on the airplane?  O320 Long Ez

Thanks in advance,

4
Hangar Flying / Tach drive cap
« on: March 14, 2005, 11:18:01 PM »
Looking for a tach drive cap for my O320.  Something that doesn't leak.  Any ideas?

5
Hangar Flying / Alternator
« on: March 08, 2005, 10:41:54 PM »
Does anyone make an adapter for the alternator that will bolt onto the accessory case?  I'd sure like to get rid of the old belt driven alternator and the associated weight.  I saw one on Wayne Blacklers "Feature Aircraft", but is that a backup or the primary?

Thanks in advance,

6
Hangar Flying / Engine Mount
« on: February 18, 2005, 11:44:02 PM »
No more flying for awhile.  Just found a crack in the top left tube at the weldment.  Anyone know where I can get a replacement?  Conical Mount for O320 LEZ.  Thanks in advance.

7
Hangar Flying / Teflon Rudder/Aileron Hinges
« on: December 20, 2004, 09:37:49 AM »
I'm trying to contact Gary Hall to buy his rudder/aileron hinge retrofits and have had no success with email or phone calls.  Does anyone have a way to contact him or maybe another source?

Thanks in advance

Pages: [1]