Show Posts - EZRider

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - EZRider

Pages: 1 2 3 [4] 5 6
46
Hangar Flying / Re: Wright Nose Lift
« on: January 02, 2009, 03:47:57 PM »
15A seems like overkill.  Since I have recieved no other response, I will measure the current draw under load then add some pad.

47
Hangar Flying / Wright Nose Lift
« on: December 27, 2008, 10:01:10 AM »
What size circuit breaker should be installed.  It is not indicated on the drawings that came with the nose lift kit.
Thanks

48
Hangar Flying / heater system
« on: April 13, 2008, 06:13:32 PM »
My website under miscellanious shows how I am installing a oil heat system for the Longez

49
Hangar Flying / NACA Scoop
« on: August 04, 2007, 02:59:17 PM »
Well Drew, you got me thinking about it again........

50
Hangar Flying / NACA Scoop
« on: August 02, 2007, 10:27:09 PM »
I want to quit modifing and start flying after 18 years.  I think I will go with the NACA scoop and getter done!
Thanks for everyones input

51
Hangar Flying / NACA Scoop
« on: August 01, 2007, 10:37:12 PM »
I am still trying to decide on the NACA scoop or down draft cooling.  Which is best and which is easiest?

52
Hangar Flying / NACA Scoop
« on: July 30, 2007, 10:33:13 PM »
Is the NACA Scoop notched into the bottom of the fuselage and firewall or does it just lay on top?

53
Hangar Flying / actuators
« on: May 19, 2007, 03:52:31 PM »
Where did you get the actuator.  Any pictures?

Thanks

54
For Sale/Wanted / High performance Rudders
« on: May 03, 2007, 11:33:15 PM »
Send me your address and I will send you a copy of the plans

vette164@msn.com

55
Hangar Flying / oil heat
« on: April 12, 2007, 09:58:40 PM »
Glennbob
I would like to have pictures but don't have your email address

56
Hangar Flying / oil heat
« on: April 11, 2007, 07:26:30 PM »
I hadn't considered insulating the area.  Possibly directing outside air through the Hellhole during the summer might be less complicated and accomplish the same thing.  I am not sure the GIB would feel the heat since the foam and glass back seat plus padding would be a lot of insullation.

57
Hangar Flying / oil heat
« on: April 09, 2007, 10:46:27 PM »
Glennbob,
I put a better picture on my website under miscellaneous showing the blower location.

58
Hangar Flying / Oil heat
« on: April 08, 2007, 09:53:51 AM »
Glennbob
I know it is hard to see on by website, but the intake will be just behind the hole in the reaseat.  I will draw air from the radiate heated air in the hellhole and l leave some openings through the rear seat hidden by the armrests, which will recirculate the cabin air.

59
Hangar Flying / Leak detection
« on: April 03, 2007, 07:52:59 PM »
Make sure it is not the fuel caps that are leaking.  They do not seal all that well.

60
Hangar Flying / oil heat
« on: March 24, 2007, 11:08:19 PM »
I can always buy the electric socks.  Half the fun is experimenting with this stuff.

Pages: 1 2 3 [4] 5 6