Hangar Flying => Hangar Flying => Topic started by: RonC on December 10, 2010, 09:44:15 PM
Title: Varieze question ? Please HELP!
Post by: RonC on December 10, 2010, 09:44:15 PM
Hi, I am wanting to buy a Varieze but I am really short on space in my hanger which has another high wing plane. I really need to know the TOTAL length. The POH shows 194 in. from nose to proppeller, but that does not fit the scale of the drawings if you get your ruller out. I am hoping it is the total length. I live in southwest Kansas and the closest Varieze is over 300 mi. The TOTAL height with nose wheel DOWN would be helpful but not as important. THANKS!!!!!
Title: Re: Varieze question ? Please HELP!
Post by: pharroah on December 11, 2010, 10:52:32 AM
I hangar a Citabria and a long EZ in my T hangar without problems. Just have to be careful. My friend has a Maule and LEZ in his hangar.
Title: Re: Varieze question ? Please HELP!
Post by: go ez on December 11, 2010, 11:31:04 AM
POH says 202" but this is likely to be nose to rear of winglet. Std length fuselage nose to aft face of prop without spinner is about 160". My experience is that the VE tucks in very neatly into otherwise unusable space. Steve
Title: Re: Varieze question ? Please HELP!
Post by: RonC on December 11, 2010, 03:07:26 PM
Thanks for the help! I own the end hanger, so I have an open corner of an otherwise T hanger, but still have the support beam in the way, I hope that makes sence. I have a Cessna 337 which takes up alot of room especially in the tail area of the hanger, so there's no room there. If I didn't have the extra corner I would be in trouble. Taking a wing off and on every time would really suck!
Title: Re: Varieze question ? Please HELP!
Post by: miketdrew on December 11, 2010, 07:25:52 PM
I used a half t hangar with my VE, rolled in sideways on car dollies. Everything was still attached, saved over half the cost of a full t hangar.
Title: Re: Varieze question ? Please HELP!
Post by: GlennBob on December 11, 2010, 08:42:07 PM
MikeTDrew,
I've often thought about that, . . How do you get the bird up on the dollies when you're ready to put 'er away ?
Do you have any pics of this action ?
I was thinking of buying a smaller hangar where this would be required.
Glennbob
Title: Re: Varieze question ? Please HELP!
Post by: miketdrew on December 11, 2010, 09:20:54 PM
Well my solution was a motorcycle jack with a wood box that would fit under the rear portion of the fuselage that was reinforced. Joe Person, who also uses a half t hangar across the way from my hangar, had a more elegant and engineered solution, a ramp that he rolled the plane on and then lever it up to roll sideways. I found that my jacking system was very handy in dealing with the gear, brakes and wheels. I do have pictures if anyone's interested.
Title: Re: Varieze question ? Please HELP!
Post by: Joe Person on December 12, 2010, 08:37:45 PM
Shoot me a message at ezejoe@comcast.net, and I can send you pictures of my rolling platform - it is easy to build, mostly wood, and it allows me to do all wheel/tire/brake work, via a salvaged Toyota scissor jack (50 cents at a scrap yard for the jack, no kidding!