Print Page - Long-EZ section 2 plans and templates required
Hangar Flying
Hangar Flying => For Sale/Wanted => Topic started by: bobthebuilder on April 28, 2011, 05:53:30 PM
Title: Long-EZ section 2 plans and templates required
Post by: bobthebuilder on April 28, 2011, 05:53:30 PM
I have purchased a set of section one plans and templates. To get going on the project, I desperately require the following:
1) A set of section two plans and templates (Lycoming engine + cowling) 2) Air Brake instructions + templates. 3) Plans for the full length rudders with concealed horns. 4) Plans and drawings for the long nose mod.
Can anyone assist?
Many thanks, Byron
Title: Re: Long-EZ section 2 plans and templates required
Post by: Linda on April 28, 2011, 07:46:31 PM
As far as I know, no plans are available for the Long-Nose. Someone may be able to send pictures of there efforts to build one.
Title: Re: Long-EZ section 2 plans and templates required
Post by: bobthebuilder on April 28, 2011, 11:52:13 PM
Searching through old posts, there seem to have been a few Section one plans and templates for sale at some point, but there is little reference to the section two documentation. How have other builders worked around this?
Title: Re: Long-EZ section 2 plans and templates required
Post by: flyingwaldo on April 29, 2011, 01:21:21 PM
Bob, Good nose info from Eric Cobb here: http://longezpilot.com/PG10%20Nose%20Extension%20_2.htm
Title: Re: Long-EZ section 2 plans and templates required
Post by: bobthebuilder on April 29, 2011, 10:27:53 PM
Thanks for the link.
Title: Re: Long-EZ section 2 plans and templates required
Post by: dorr on May 03, 2011, 03:13:31 PM
I think I can help you with all that stuff - I don't answer this website often enough to be efficient so use my e-mail address.
RAF closed its doors about 5 years ago and passed on all the supplemental plans so we can keep helping out the builders. I hold and stock most of the stuff.
The Ronneberg nose, perhaps the most famous long nose, might have been developed by Eric Cobb - I have plans for that too - primitive with templates showing how to do it.
Beagle, aka David Orr canardfinder@att.net
Title: Re: Long-EZ section 2 plans and templates required
Post by: Linda on May 04, 2011, 09:13:07 PM
The plans Section II Engine installation is for the 0 - 235 however almost all the info is good for the 0 - 320. There are copies of this section for sale from various individuals. RAF closed in 1985 or so and any unused plans will be coming from individual who do not plan to build. Used plans could also be used if you can get the baffle templetes. No numbers are required since there is no one to register it to. And you don't have to call it a Long-ez.
Title: Re: Long-EZ section 2 plans and templates required
Post by: Linda on May 04, 2011, 09:16:01 PM
Byron where do you live. I may be able to help with the cowls.
Title: Re: Long-EZ section 2 plans and templates required
Post by: bobthebuilder on May 06, 2011, 02:18:49 PM
Hi Linda,
I'm in Johannesburg, South Africa. where are you?
Title: Re: Long-EZ section 2 plans and templates required
Post by: Linda on May 06, 2011, 09:27:31 PM
I'm located in Southern California about 5 miles from Hollywood. Want be able to help with the cowls.