1
Hangar Flying / Re: Manifold Pressure line for EIS, O-235
« on: January 26, 2011, 08:07:04 PM »
Only one per cylinder, cut the primer line. Im good now...thanks!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Hangar Flying / Re: Manifold Pressure line for EIS, O-235
« on: January 24, 2011, 11:47:18 PM »
Just read the O-235 manual, only shows one but Ill check in the morning to see if there are two.
3
Hangar Flying / Re: Manifold Pressure line for EIS, O-235
« on: January 24, 2011, 10:53:31 PM »
Bruce,
Do you mean a O-235 manual? I dont have one but Ill go search for one online.
Mike
Do you mean a O-235 manual? I dont have one but Ill go search for one online.
Mike
4
Hangar Flying / Manifold Pressure line for EIS, O-235
« on: January 24, 2011, 12:56:32 AM »
I just bought the Electroair electronic ignition system. I have an O-235 with a Marvel Schebler MA-3A carbuerator. I hear that you can pick up the manifold pressure line off of the carb, but Im not sure where and what fitting I need. Anyone done this before or have another idea where to pick up the pressure line? I thought about tapping a nipple into the intake manifold on cylinder 3 or 4 but I dont want to disrupt the fuel flow to a cylinder with the threaded nipple.
Thanks,
Mike
Thanks,
Mike
5
Hangar Flying / Re: Ken Ashley
« on: August 12, 2010, 10:35:50 AM »
Jims number doesnt work either...
6
Hangar Flying / Ken Ashley
« on: August 08, 2010, 08:40:31 AM »
Anyone have a phone number for Ken Ashley in Charlotte?
8
Hangar Flying / Re: Any EZ flyers near Raleigh NC?
« on: July 04, 2010, 11:36:52 AM »
Ive got a Varieze in Monroe, NC. I have heard of a couple long ezes around but havent seen any.
Pages: [1]