Show Posts - vonjet

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - vonjet

Pages: [1] 2
1
For Sale/Wanted / WANTED: FUEL TANK SEALER (RHINO)
« on: May 21, 2014, 06:00:47 PM »
If Anybody is using the Rhino coatings fuel tank sealer and have a gallon or more left over please contact me. I would like to purchase some but do Not need the 3 gallons which Spruce sells.

2
Hangar Flying / Fuel Probes for use with Dynon Skyview
« on: November 09, 2013, 06:33:09 PM »
Can anyone recommend a good fuel probe to use with the Dynon Skyview EFIS and one that works well with our type of fuel tank.
Thanks
Bryan

3
For Sale/Wanted / Grove Gear Hoop for sale
« on: November 03, 2013, 04:14:31 PM »
This was custom made by Grove Aircraft for a four place canard called the SQ2000. It is airfoiled and drilled for brake lines. It measures 78.5" from outer axle pad to outer axle pad. 33.5" from ground to bottom of the gear hoop.
It's gonna be heavy and expensive to ship so Id prefer local pick up at Camarillo airport. KCMA.
Make offer.

4
Hangar Flying / Nose Tires for Cozy MKIV
« on: October 09, 2013, 09:06:26 AM »
Is the Aero Classic 10/350-4 (6ply) that spruce sells the proper tire for the MKIV?

5
Hangar Flying / Looking for Advice on which Nosewheel to buy for MKIV
« on: September 24, 2013, 09:16:30 AM »
Cozy Girls nosewheel
Grove Aircraft nose wheel

Or any others people know about?

6
Hangar Flying / Cozy MKIV Canard rigging templates
« on: March 31, 2013, 06:42:28 PM »
Anybody have the Roncz canard incidence template for Cozy MKIV i can borrow to mount my Canard?
Please email me. Vonjet@gmail.com

7
Hangar Flying / Can someone loan me the RONCZ canard and wing templates
« on: June 15, 2012, 12:50:08 PM »
Anyone have a Roncz canard TOP contour template and the Elevator Travel template.?
Also looking for the wing Incidence template.
I just need to borrow them for rigging. I will return when finished.
Thanks

8
Hangar Flying / Need Help from cozy or eracer builders
« on: May 22, 2012, 07:13:01 PM »
I need some dimensions off the firewall. I need the distance from the engine mount bolts top and bottom as well as side to side. And if you have the distance from firewall to the engine mount rings thy would be helpful. Im trying to see if I can use a cozy mkiv mount for my project.
Thanks!

9
For Sale/Wanted / New Ignition Switch For sale
« on: May 07, 2012, 02:28:38 PM »
I have an Aircraft Spruce Ignition Switch with keys. Old stock and Unused. Part Number A-510-2   $80 shipped in the USA.
Has L R Both and Start positions. Includes Keys and hardware.

10
Hangar Flying / Downdraft vs updraft cooling
« on: March 17, 2012, 08:21:13 PM »
Which is more effecient any why?  Speed gains from either?

11
Hangar Flying / Death of the Canard Builders??
« on: March 14, 2012, 11:25:42 PM »
Im not sure if its just this forum or every Canard forum but since I have been following in the past  15 years or so the Canard presence online has all but dissapeared. 
I can go for a weeks and find nothing new on this forum.  Has the reign of the Canard era given way to the Vans RV?? Or Has composite building as a whole given way to the Vans RV??
A friend of mine said the Canard community is dying with the people of its time because no new builders are coming into it. It seems that way which is sad to see..

12
For Sale/Wanted / SOLD...F/S. Berkut/E-Racer retract gear parts SOLD
« on: February 26, 2012, 09:43:39 PM »
Lower gear leg Talons And retract linkages. Send me email for pictures vonjet@gmail.com

$400.00 shipped in the USA.

13
For Sale/Wanted / WANTED: retracts (eracer or infinity)
« on: February 18, 2012, 03:12:32 PM »
If you have a set of gear legs from berkut, eracer or infinity please contact me. Vonjet@gmail.com

14
Hangar Flying / Engine Baffling Blueprints (eracer)
« on: February 16, 2012, 02:09:02 PM »
Anybody have a set of drawings for the baffling for the Eracer?  Or similar aircraft?  Does anyone make a baffling kit?

15
Hangar Flying / Looking for Earl Haguewood
« on: May 09, 2011, 07:13:45 PM »
I got ahold of Shirl Dickey. Now Im looking for Earl Haguewood. IF someone knows how I can contact him please let me know.
THanks
Bryan

Pages: [1] 2