Hangar Flying => For Sale/Wanted => Topic started by: longez84 on June 29, 2010, 07:46:20 AM
Title: Wanted - O-235 Longez propeller
Post by: longez84 on June 29, 2010, 07:46:20 AM
Looking for a good Climb Propeller for an O-235 Longez. 58x66 is recommended but would like some suggestions for short field performance with a minimum impact on cruise. Thanks for your help. Rob
Title: Re: Wanted - O-235 Longez propeller
Post by: BILL2 on July 02, 2010, 07:50:36 AM
Hi, I have a long EZ, O235 equipped with 59X64: cruising TAS at 2400 is 120 Kt without pants, 125 Kt with! ;) today, outside temperature was 90°F, airfiel altitude 110ft, TOW 1600 lbs airborne in less than 1500ft. Hope that will help. OT
Title: Re: Wanted - O-235 Longez propeller
Post by: longez84 on July 02, 2010, 07:58:23 AM
Bill2
Thanks for the reply. What is your full throttle rpm at cruise altitude? How did you takeoff at 1600 lbs., that's 175 lbs over max takeoff weight, impressive that it wold fly?
Title: Re: Wanted - O-235 Longez propeller
Post by: BILL2 on July 02, 2010, 08:20:38 AM
Thanks for the reply. What is your full throttle rpm at cruise altitude? How did you takeoff at 1600 lbs., that's 175 lbs over max takeoff weight, impressive that it wold fly?
;D ;D sorry i did mistake with conversion kg into lbs... I mean 1150 lbs!
About full throttle TAS, if my memory is good it was about 145 Kt at 2950 RPM ZP 3000 Ft. I felt that engine could take more rpm, but I don't like exceeding limitation..
Title: Re: Wanted - O-235 Longez propeller
Post by: longez84 on July 02, 2010, 02:29:31 PM
Bill2,
Yeah I hear ya. My max rpm is 2800 so I'm trying to find a prop that won't overspeed the engine to much. I'm hearing that no more than 5% over is ok.
Title: Re: Wanted - O-235 Longez propeller
Post by: Trucker mike on September 06, 2010, 10:47:24 AM