Hangar Flying

Hangar Flying => Hangar Flying => Topic started by: easyrider on January 13, 2006, 02:20:20 PM

Title: Brakes
Post by: easyrider on January 13, 2006, 02:20:20 PM

I have always been concerned with the nylon brakes in the EZs.
The part I feel is expressly vulnerable is the line from the gear leg to the brake caliper.
I have put together a kit that replaces the line with stainless braided teflon hose and all the connectors.The tricky one was from the braided hose flare to the nyloseal compression.
Easyrider
Canardflyer@direcway.com

Title: transition from hose to fitting
Post by: Juan Rivera on January 16, 2006, 07:08:16 PM

nothing tricky just replace the fitting going into the master cylinder with an  AN fitting, same at the brake.