lycoming tach shaft/cable
« previous next »
Pages: [1]

Author Topic: lycoming tach shaft/cable  (Read 4010 times)

0 Members and 1 Guest are viewing this topic.

Tomkat

  • Guest
lycoming tach shaft/cable
« on: February 22, 2005, 11:02:05 PM »
What is the problem with the tack shaft,  when not running a mechanical tach?
I have a 0-290 and plan to cap off the tack output. I read somewhere that there is a potential problem with the shaft or pin .
Please let me know what your experience has been.
Thanks
Tom
Logged

Offline easyrider

  • Newbie
  • *
  • Posts: 222
    • View Profile
Mechanical Tach.
« Reply #1 on: February 26, 2005, 06:46:23 PM »
I blanked off my drive when I went to an electronic tach,after I fitted electronic ignition.The cap is available from Chief Aircraft part# EI RC1 priced $6.95.
WWW.chiefaircraft.com
Easyrider
Logged

Offline Waiter

  • Newbie
  • *
  • Posts: 306
    • View Profile
    • http://www.iflyez.com
lycoming tach shaft/cable
« Reply #2 on: February 27, 2005, 09:41:40 AM »
There is a possibility that the drive shaft could come out, if the retaining pin fails.  If there is a tach sender attached. the shaft cannot come out, even if the pin fails.

The last time I had the accessory case off of mine, I removed the shaft.

Waiter
Logged
LongEZ-RG   >>    N961EZ
O-320 160hp  >>    MT Constant Speed Prop
F-16 Performance, On a Piper Cub Budget
www.iflyez.com
Pages: [1]
« previous next »