Hangar Flying => Hangar Flying => Topic started by: Dave in Eugene on January 21, 2006, 06:41:41 PM
Title: Dynon EFS?
Post by: Dave in Eugene on January 21, 2006, 06:41:41 PM
Can those of you that have installed the Dynon EFS please give me a sense of overall cost and complexity of installation. Thanks. Dave
Title: Dynon EFS?
Post by: Drew on January 21, 2006, 07:42:38 PM
I installed the Dynon EFIS in my Longez several years ago. Overall cost is as listed on their site. Installation is easy as long as you can read. The installation kit which you can buy from B&C for 90 or so dollars makes all the electrical stuff real eazy.
I am currently getting a Blue Mountain EFIS G3 which is a little more cost (~3000) but does more. In addition to the attitude, heading, pitot static, turn rate that Dynon gives you, the BM G3 gives you an HSI, GPS (moving map) and will feed in ILS.
Title: Dynon EFS?
Post by: Waiter on January 22, 2006, 07:45:53 AM
I'm currently installing one. I think it can be as simple as connecting up the power and ground.
Actually, its not a lot more complicated than that, unless you get the AOA probe and/or the external compass kit. then you need to figure out where to intall those things and get power and signal to them.
I had steam guages and have done a retrofit.
Look on my web site under the JUNE 2005 time frame.