Hangar Flying => Hangar Flying => Topic started by: Waiter on March 27, 2007, 07:40:08 AM
Title: Jeff Rose Ignition Manual Needed
Post by: Waiter on March 27, 2007, 07:40:08 AM
HELP:
I'm looking for a manual for one of the early model Jeff Rose ignition systems. The model I have is approximately 8 years old. It has the MAP sensor mounted on the same plate as the coils, and I have the sensor assembly thast mounts in the MAG hole.
If you're not able to scan it, I would be more than happy to pay postage both ways if you could send it to me to scan.
I contacted Electroair and they were very helpfull in answering my wiring questions, but he doesn't have a manual for the older system either.
SO, I told them if I find one (a manual) I'll scan it into a PDF file and forward a copy of the PDF file for their archives..
Although Jeff retired, The Jeff Rose Ignition System is alive and well under the name of ElectroAir. Visit their web site at:
http://www.electroair.net/index.html
Waiter
PS - You can e-mail me waiter AT iflyez DOT com
Title: Re: Jeff Rose Ignition Manual Needed
Post by: Jack on April 02, 2007, 08:05:26 PM
Quote from: Waiter
HELP:
I'm looking for a manual for one of the early model Jeff Rose ignition systems. The model I have is approximately 8 years old.
Got my wife checking my office for mine. If she finds it will have her scan it for you. This could take a few weeks. I am dead center in the sandpit and won't be taking any R&R for a couple of months.
I ran my Map line off the primer feed on my O-235. Can't recall if I used a timer light or not to verify accuracy. It runs really nice and just kept it that way. I also use Bosch plugs that fit the standard aircraft plug holes.
Jack
Title: Jeff Rose Ignition Manual Needed
Post by: Waiter on April 02, 2007, 08:19:42 PM
Jack,
Got it. In fact, I got two of them. I'll post them on my site.
Thanks anyway
Waiter
Title: Re: Jeff Rose Ignition Manual Needed
Post by: Jack on April 17, 2008, 05:23:18 PM
Quote from: Jack
I also use Bosch plugs that fit the standard aircraft plug holes.
Jack
Long ago some folks inquired about which plugs to use with the Rose ignition. I am home on a break from the sandpit and pulled out my plugs. I have been running Bosch platinum #4226 and DR8BPX. I also picked up some Autolites #386. I only ran the Bosch and at 3 bucks a pop they ran fine. Both plugs fit into the stock aircraft engine plug holes. Any auto parts store should stock them.